Home › BODY ELECTRICAL › WIPER AND WASHER › WASHER MOTOR

WASHER MOTOR > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    E146315
  1. Install the windshield washer motor and pump to the packing of the washer jar.



2. FILL UP WASHER JAR ASSEMBLY WITH WASHER FLUID


    E146316
  1. Connect the washer hose to the washer motor and pump, and fill the washer jar with washer fluid.



3. INSTALL WINDSHIELD WASHER JAR ASSEMBLY


    E146312
  1. Connect the connector.

  1. Install the windshield washer jar with the clip and 3 bolts.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }