WASHER MOTOR > REMOVAL |
| 1. REMOVE WINDSHIELD WASHER JAR ASSEMBLY |
![]() |
Disconnect the connector.
Remove the clip and 3 bolts. Then remove the washer jar.
| 2. DRAIN WASHER FLUID |
![]() |
Remove the washer hose from the windshield washer motor and pump, and drain the washer fluid.
| 3. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
![]() |
Pull out the washer motor and pump from the packing of the washer jar to remove it.