REAR SPEED SENSOR > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE REAR WHEEL |
| 4. REMOVE REAR SPEED SENSOR LH |
![]() |
Disconnect the speed sensor connector (labeled A).
Remove the nut (labeled B) and speed sensor (labeled C).
| 5. REMOVE REAR SPEED SENSOR RH |
![]() |
Disconnect the speed sensor connector (labeled A).
Remove the nut (labeled B) and speed sensor (labeled C).
| 6. REMOVE SKID CONTROL SENSOR WIRE |
Disconnect the sensor connector (labeled A).
Detach the 7 clips (labeled B).
Remove the bolt (labeled C).
Remove the nut (labeled D) and skid control sensor wire.
