FRONT SPEED SENSOR > INSTALLATION |
| 1. INSTALL FRONT SKID CONTROL SENSOR CLAMP LH |
Install the skid control sensor clamp (labeled A) with the bolt (labeled B).

| 2. INSTALL FRONT SPEED SENSOR LH |
Install the speed sensor (labeled D) with the hexagon socket head cap bolt (labeled E).
| 3. INSTALL FRONT SKID CONTROL SENSOR WIRE LH |
![]() |
Connect the connector (labeled A).
Install the 3 harness clamps (labeled B) with the 3 bolts (labeled C).
![]() |
Install the harness clamp with the bolt (labeled D).
Attach the 3 clips (labeled E).
Connect the speed sensor connector (labeled F).
| 4. INSTALL FRONT SKID CONTROL SENSOR CLAMP RH |
Install the skid control sensor clamp (labeled A) with the bolt (labeled B).

| 5. INSTALL FRONT SPEED SENSOR RH |
Install the speed sensor (labeled D) with the hexagon socket head cap bolt (labeled E).
| 6. INSTALL FRONT SKID CONTROL SENSOR WIRE RH |
![]() |
Install the skid control sensor clamp (labeled A) with the bolt (labeled B).
Install the connector (labeled C) with connect the connector (labeled C).
Install the 2 harness clamps (labeled D) with the 2 bolts (labeled E).
![]() |
Install the harness clamp with the bolt (labeled E).
Attach the 3 clips (labeled F).
Connect the speed sensor connector (labeled G).
| 7. INSTALL FRONT WHEEL |
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 9. CHECK SPEED SENSOR SIGNAL |
Check the speed sensor signal (Click here).