Home › SUSPENSION & AXLE › TIRE AND WHEEL › TIRE PRESSURE WARNING VALVE AND TRANSMITTER

TIRE PRESSURE WARNING VALVE AND TRANSMITTER > DISPOSAL

for Preparation Click here


HINT:
The tire pressure warning valve and transmitter is powered by a lithium battery. When disposing of the tire pressure warning valve and transmitter, remove the battery and dispose of it correctly.



1. DISPOSE OF TIRE PRESSURE WARNING VALVE AND TRANSMITTER


    C153799
  1. Pry off the back cover with a screwdriver to remove it.



    C153800E04
  1. The battery and base board are exposed. While taking out the battery, cut off the 2 terminals which connect the battery and base board.