Home › SECURITIES › THEFT DETERRENT › ENGINE HOOD COURTESY SWITCH

ENGINE HOOD COURTESY SWITCH > INSPECTION



1. INSPECT HOOD LOCK ASSEMBLY (HOOD COURTESY SWITCH)



B356562E01

Text in Illustration 
*a
Lock position
*b
Unlock position
*c
Component without harness connected
(Hood Lock Assembly (Hood Courtesy Switch))
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Lock position
    Below 1 Ω
    1 - 2
    Unlock position
    10 kΩ or higher

    If the results are not as specified, replace the hood lock assembly (hood courtesy switch).