BRAKE MASTER CYLINDER > REMOVAL |
| 1. DRAIN BRAKE FLUID |
| 2. DISCONNECT BRAKE FLUID LEVEL WARNING SWITCH CONNECTOR |
![]() |
Disconnect the brake fluid level warning switch connector.
| 3. DISCONNECT FRONT NO. 1 BRAKE TUBE |
![]() |
Using a union nut wrench, disconnect the brake tube (labeled A) from the brake master cylinder.
| 4. DISCONNECT REAR NO. 1 BRAKE TUBE |
Using a union nut wrench, disconnect the brake tube (labeled B) from the brake master cylinder.
| 5. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY |
![]() |
Remove the 2 nuts and brake master cylinder from the brake booster.
Remove the brake master cylinder seal from the brake master cylinder.