Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › REAR CROSS TRAFFIC ALERT BUZZER (for Regular Cab)

REAR CROSS TRAFFIC ALERT BUZZER (for Regular Cab) > INSTALLATION

for Preparation Click here



1. INSTALL BLIND SPOT MONITOR BUZZER
  1. Attach the clamp to install the blind spot monitor buzzer.

  1. Connect the connector.



2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH
  1. Attach the 5 clips to install the front quarter trim panel assembly LH.

  1. Install the 2 bolts.

  1. Connect the front seat outer belt assembly LH with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



  1. Attach the 2 claws to close the shoulder belt anchor cover.


    B355509



    B355506
  1. Attach the claw to close the cover.



3. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY LH
  1. Attach the 7 clips to install the lower quarter trim panel assembly LH.



    B166849
  1. Twist the front seat outer belt assembly LH clockwise and connect it with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Attach the 2 claws to install the cover.



4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
  1. Install the front door opening trim weatherstrip LH.



5. INSTALL COWL SIDE TRIM BOARD LH
  1. Attach the 2 clips to install the cowl side trim board LH.

  1. Install the nut.



6. INSTALL FRONT DOOR SCUFF PLATE LH
  1. Attach the 6 claws and 3 clips to install the front door scuff plate LH.



7. INSTALL LUGGAGE COMPARTMENT BOX LH
  1. Attach the 3 claws to install the luggage compartment box LH.

  1. Install the 2 clips.



8. INSTALL LUGGAGE COMPARTMENT BOX RH
  1. Install the luggage compartment box RH with the 4 clips.



9. INSTALL UPPER BACK PANEL GARNISH
  1. Attach the 10 clips to install the upper back panel garnish.