Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › REAR CROSS TRAFFIC ALERT BUZZER (for Double Cab)

REAR CROSS TRAFFIC ALERT BUZZER (for Double Cab) > INSTALLATION

for Preparation Click here



1. INSTALL BLIND SPOT MONITOR BUZZER
  1. Attach the clamp to install the blind spot monitor buzzer.

  1. Connect the connector.



2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH
  1. Pass the rear seat outer belt assembly through the hole of the front quarter trim panel assembly LH.

  1. Attach the 4 clips to install the front quarter trim panel assembly LH.

  1. Install the 2 bolts.



    B356806
  1. Attach the claw to close the cover.



3. INSTALL LOWER QUARTER PANEL ASSEMBLY LH
  1. Attach the 6 clips to install the lower quarter trim panel assembly LH.

  1. Connect the rear seat outer belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Attach the 2 claws to install the cover.



4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
  1. Install the rear door opening trim weatherstrip LH.



5. INSTALL REAR DOOR SCUFF PLATE LH
  1. Attach the 6 claws and 2 clips to install the rear door scuff plate LH.



6. INSTALL REAR SEAT ASSEMBLY


    B166544
  1. Attach the 4 hooks on the back side of the rear seat assembly and install it.

    NOTICE:
    Be careful not to damage the vehicle body.



    B165600E01
  1. Install the 6 bolts in the order indicated in the illustration.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



7. INSTALL SEAT FLOOR BOX


B165790
  1. Attach the claw to install the seat floor box.

  1. Install the 4 knobs.



8. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH


    B356758
  1. Attach the 2 hooks to install the luggage compartment side cover sub-assembly RH.

  1. Close the luggage compartment side cover sub-assembly RH and turn the knob.



9. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH


    B356759
  1. Attach the 3 hooks to install the luggage compartment side cover sub-assembly LH.

  1. Close the luggage compartment side cover sub-assembly LH and turn the knob.



    B166545
  1. Pull the 2 seat adjusting handles and fold down the seat cushion.