Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › REAR CROSS TRAFFIC ALERT BUZZER (for CrewMax)

REAR CROSS TRAFFIC ALERT BUZZER (for CrewMax) > INSTALLATION

for Preparation Click here



1. INSTALL BLIND SPOT MONITOR BUZZER
  1. Attach the clamp to install the blind spot monitor buzzer.

  1. Connect the connector.



2. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY LH
  1. Attach the 5 clips to install the lower quarter trim panel assembly LH.

  1. Connect the rear seat outer belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Attach the 2 claws to install the cover.



3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
  1. Install the rear door opening trim weatherstrip LH.



4. INSTALL REAR DOOR SCUFF PLATE LH
  1. Attach the 8 claws and 2 clips to install the rear door scuff plate LH.