REAR CROSS TRAFFIC ALERT BUZZER (for CrewMax) > REMOVAL |
| 1. REMOVE REAR DOOR SCUFF PLATE LH |
![]() |
Detach the 8 claws and 2 clips, and remove the rear door scuff plate LH.
| 2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH |
Remove the rear door opening trim weatherstrip LH.
| 3. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY LH |
![]() |
Detach the 2 claws and remove the cover.
![]() |
Loosen the bolt and disconnect the rear seat outer belt assembly.
![]() |
Detach the 5 clips and remove the lower quarter trim panel assembly LH.
| 4. REMOVE BLIND SPOT MONITOR BUZZER |
![]() |
Disconnect the connector.
Detach the clamp and remove the blind spot monitor buzzer.