VSC OFF SWITCH > INSTALLATION |
| 1. INSTALL VSC OFF SWITCH |
![]() |
Attach the 2 claws to install the VSC OFF switch into the No. 2 switch hole base.
Connect the VSC OFF switch connector.
| 2. INSTALL NO. 2 SWITCH HOLE BASE |
Connect each connector.
![]() |
Attach the 4 clips to install the No. 2 switch hole base.
| 3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
Connect the hood lock control cable to the hood lock control lever, rotate the hood lock control cable, and then slide and push the hood lock control cable into place.

Attach the 3 hooks to connect the hood lock control lever to the lower instrument panel finish panel sub-assembly LH.
Connect each connector.
![]() |
Attach the 9 clips and 2 claws to install the lower instrument panel finish panel sub-assembly LH.
Install the 2 bolts <A>.
| 4. INSTALL COWL SIDE TRIM BOARD LH |
Attach the 2 clips to install the cowl side trim board LH.
Install the nut.
| 5. INSTALL FRONT DOOR SCUFF PLATE LH |
for Double Cab:
for CrewMax:
for Regular Cab:
| 6. INSTALL INSTRUMENT SIDE PANEL LH |
![]() |
Attach the 4 guides and 3 claws to install the instrument side panel LH.