Home › ENGINE ยท 3UR-FBE › EMISSION CONTROL › PCV VALVE

PCV VALVE > INSPECTION

for Preparation Click here



1. INSPECT PCV VALVE SUB-ASSEMBLY


    A158645E01
  1. Install a clean hose to the PCV valve.



  1. Check the PCV valve operation.

    1. Blow air into the cylinder head side, and check that air passes through easily.

      CAUTION:
      Do not suck air through the valve.
      Petroleum substances inside the valve are hazardous to your health.



    2. A158646E01
    3. Blow air into the intake manifold side, and check that air passes through with difficulty.
      If the result is not as specified, replace the PCV valve sub-assembly.

  1. Remove the clean hose from the PCV valve.