FRONT CRANKSHAFT OIL SEAL > REMOVAL |
| 1. REMOVE RADIATOR ASSEMBLY |
| 2. DISCONNECT WATER BY-PASS PIPE SUB-ASSEMBLY |
![]() |
Remove the 3 bolts.
![]() |
Disconnect the 2 hoses and water by-pass pipe.
| 3. REMOVE OIL FILTER BRACKET |
![]() |
Remove the 2 nuts, bolt, oil filter bracket and gasket.
| 4. REMOVE CRANKSHAFT PULLEY |
![]() |
Using SST, hold the crankshaft pulley and loosen the pulley bolt. Continue to loosen the bolt until only 2 or 3 threads are screwed into the crankshaft.
![]() |
Using the pulley set bolt and SST, remove the crankshaft pulley and pulley bolt.
| 5. REMOVE FRONT CRANKSHAFT OIL SEAL |
![]() |
Using a screwdriver, pry out the oil seal.