Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW REGULATOR MOTOR (for Rear Door)

POWER WINDOW REGULATOR MOTOR (for Rear Door) > INSPECTION

for Preparation Click here



1. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for Double Cab)


    B161800E05
  1. Apply battery voltage to connector terminals 1 and 2.

  1. Check that the motor gear rotates smoothly as follows.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 1
    Battery negative (-) → 2
    Motor gear rotates counterclockwise
    Battery positive (+) → 2
    Battery negative (-) → 1
    Motor gear rotates clockwise

    1. If the result is not as specified, replace the rear power window regulator motor assembly LH.
      Text in Illustration 
      *1
      Motor Gear
      *a
      Component without harness connected
      (Rear Power Window Regulator Motor Assembly LH)
      *b
      Clockwise
      *c
      Counterclockwise



2. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for CrewMax)


    B161799E06
  1. Apply battery voltage to connector terminals 1 and 2.

  1. Check that the motor gear rotates smoothly as follows.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 1
    Battery negative (-) → 2
    Motor gear rotates counterclockwise
    Battery positive (+) → 2
    Battery negative (-) → 1
    Motor gear rotates clockwise

    1. If the result is not as specified, replace the rear power window regulator motor assembly LH.
      Text in Illustration 
      *1
      Motor Gear
      *a
      Component without harness connected
      (Rear Power Window Regulator Motor Assembly LH)
      *b
      Clockwise
      *c
      Counterclockwise



3. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (for Double Cab)


    B161799E06
  1. Apply battery voltage to connector terminals 1 and 2.

  1. Check that the motor gear rotates smoothly as follows.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 1
    Battery negative (-) → 2
    Motor gear rotates counterclockwise
    Battery positive (+) → 2
    Battery negative (-) → 1
    Motor gear rotates clockwise

    1. If the result is not as specified, replace the rear power window regulator motor assembly RH.
      Text in Illustration 
      *1
      Motor Gear
      *a
      Component without harness connected
      (Rear Power Window Regulator Motor Assembly RH)
      *b
      Clockwise
      *c
      Counterclockwise



4. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (for CrewMax)


    B161800E05
  1. Apply battery voltage to connector terminals 1 and 2.

  1. Check that the motor gear rotates smoothly as follows.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 1
    Battery negative (-) → 2
    Motor gear rotates clockwise
    Battery positive (+) → 2
    Battery negative (-) → 1
    Motor gear rotates counterclockwise

    1. If the result is not as specified, replace the rear power window regulator motor assembly RH.
      Text in Illustration 
      *1
      Motor Gear
      *a
      Component without harness connected
      (Rear Power Window Regulator Motor Assembly RH)
      *b
      Clockwise
      *c
      Counterclockwise