REAR LEAF SPRING > INSTALLATION |
| 1. INSTALL REAR SPRING SHACKLE BUSH |
![]() |
Install the 2 shackle bushes to the frame.
| 2. INSTALL TUBE |
![]() |
Install the tube to the bush.
| 3. TEMPORARILY INSTALL REAR SPRING ASSEMBLY LH |
![]() |
Temporarily install the spring with the No. 2 spring shackle plate, shackle outer plate, 2 washers and 2 nuts to the rear side.
![]() |
Temporarily install the spring with the bolt, washer and nut to the front side.
| 4. INSTALL REAR SPRING BUMPER SUB-ASSEMBLY |
![]() |
Install the spring bumper.
| 5. TEMPORARILY INSTALL REAR SPRING U BOLT |
![]() |
Temporarily install the spring seat and 2 U bolts with the 4 washers and 4 nuts.
| 6. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY |
![]() |
Connect the parking brake cable to the vehicle with the 3 bolts.
| 7. STABILIZE SUSPENSION |
Lower the vehicle.
Press down on the vehicle several times to stabilize the suspension.
| 8. TIGHTEN REAR SPRING ASSEMBLY LH |
Tighten the 3 nuts.
| 9. TIGHTEN REAR SPRING U BOLT |
Tighten the 4 nuts.
| 10. INSTALL REAR WHEEL |
| 11. INSTALL SPARE TIRE |
| 12. REMOVE SAFETY STANDS |