EXHAUST PIPE > REMOVAL |
| 1. REMOVE TAILPIPE ASSEMBLY |
Remove the bolt and clamp.
Disconnect the exhaust pipe support to remove the tailpipe assembly.
Remove the gasket.
| 2. REMOVE CENTER EXHAUST PIPE ASSEMBLY |
Remove the 4 bolts.
Disconnect the 3 exhaust pipe supports to remove the center exhaust pipe assembly.
Remove the 2 gaskets.
| 3. REMOVE FRONT PROPELLER SHAFT ASSEMBLY (for 4WD) |
| 4. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY |
Remove the 3 nuts.
Disconnect the exhaust pipe support to remove the front No. 2 exhaust pipe assembly.
Remove the gasket.
| 5. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1) |
![]() |
Using SST, remove the air fuel ratio sensor.
| 6. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) |
![]() |
Using SST, remove the heated oxygen sensor.
| 7. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
Remove the 3 nuts and front exhaust pipe assembly.
Remove the gasket.
| 8. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1) |
![]() |
Using SST, remove the air fuel ratio sensor.
| 9. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) |
![]() |
Using SST, remove the heated oxygen sensor.