Home › RESTRAINTS › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY (for Double Cab)

REAR SEAT OUTER BELT ASSEMBLY (for Double Cab) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.



1. INSTALL REAR SEAT OUTER BELT ASSEMBLY


B166718E01
  1. Align the vehicle's claws with the seat belt retractor positioning holes.

  1. Install the seat belt with the 2 bolts.

    HINT:
    First install bolt A, and then install bolt B.

    Torque:
    for bolt A:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
    for bolt B:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B166738
  1. Install the shoulder anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY
  1. Pass the rear seat outer belt assembly through the hole of the front quarter trim panel assembly LH.

  1. Attach the 4 clips to install the front quarter trim panel assembly LH.

  1. Install the 2 bolts.



    B356806
  1. Attach the claw to close the cover.



3. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY


B165832
  1. Attach the 6 clips to install the quarter trim panel lower.



    B165831
  1. Install the seat belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B165830
  1. Attach the 2 claws to install the cover.



4. INSTALL REAR DOOR SCUFF PLATE
  1. Attach the 6 claws and 2 clips to install the rear door scuff plate LH.



5. INSTALL REAR SEAT ASSEMBLY
  1. Install the rear seat (Click here).