Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER SWITCH

WIPER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    E146421
  1. Attach the claw to install the wiper switch.

  1. Connect the 2 connectors.



2. INSTALL UPPER STEERING COLUMN COVER


    E146420
  1. Attach the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel.

  1. Attach the claw to install the upper steering column cover.



3. INSTALL LOWER STEERING COLUMN COVER


    E146419
  1. Attach the 2 claws to install the lower steering column cover.

    NOTICE:
    Do not damage the tilt and telescopic switch.

  1. Using a screwdriver, while turning the steering wheel to the right and left, install the 2 screws and lower steering column cover.