HOOD > ON-VEHICLE INSPECTION |
| 1. INSPECT HOOD SUB-ASSEMBLY |
Check that the clearance measurements of areas A to D are within the standard range.

| Area | Specified Condition |
| A | 3.7 to 6.7 mm (0.146 to 0.264 in.) |
| B | -1.5 to 1.5 mm (-0.0591 to 0.0591 in.) |
| C (Reference) | 25.25 to 28.25 mm (0.995 to 1.113 in.) |
| D (Reference) | 5.6 to 8.6 mm (0.220 to 0.339 in.) |