Home › SECURITIES › THEFT DETERRENT › ENGINE HOOD COURTESY SWITCH

ENGINE HOOD COURTESY SWITCH > INSTALLATION



1. INSTALL HOOD LOCK ASSEMBLY


  1. Apply MP grease to the sliding areas of the hood lock assembly.


    B356561

  1. Connect the hood lock control cable assembly.

  1. Install the hood lock assembly.

  1. Install the 3 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Install a new hood lock nut cap.

  1. Connect the connector.

  1. Attach the clamp.



2. INSTALL RADIATOR GRILLE SUB-ASSEMBLY
  1. Attach the 4 claws and 3 clips to install the radiator grille sub-assembly.

  1. Install the 4 screws and 2 clips.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }