ENGINE HOOD COURTESY SWITCH > REMOVAL |
| 1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY |
![]() |
Put protective tape around the radiator grille sub-assembly.
| *1 | Protective Tape |
Remove the 4 screws and 2 clips.
![]() |
Detach the 4 claws and 3 clips and remove the radiator grille sub-assembly.
| 2. REMOVE HOOD LOCK ASSEMBLY |
![]() |
Disconnect the connector.
Detach the clamp.
![]() |
Using a screwdriver, remove the hood lock nut cap.
| *1 | Protective Tape |
![]() |
Remove the 3 bolts.
Remove the hood lock assembly.
Disconnect the hood lock control cable assembly.