Home › BODY › MIRROR › OUTER REAR VIEW MIRROR GLASS

OUTER REAR VIEW MIRROR GLASS > INSTALLATION

for Preparation Click here




1. INSTALL OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



    B167460
  1. w/ Mirror Heater:
    Connect the 2 connectors.



    B167461
  1. w/ Retract Mirror:
    Connect the 3 connectors.



    B357080
  1. w/ Blind Spot Monitor:
    Connect the 3 connectors.



    B166389
  1. Attach the 4 claws to install the outer rear view mirror sub-assembly LH.

    NOTICE:
    Push the mirror downward until a "snap" sound is heard.