Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE NO. 1 HEADLIGHT BULB


E281330
  1. Remove the No. 1 headlight bulb cover.



  1. Release the set spring lock and remove the No. 1 headlight bulb.

    NOTICE:
    Do not touch the No. 1 headlight bulb glass.



    E281331



2. REMOVE FRONT TURN SIGNAL LIGHT BULB


E281333
  1. Turn the front turn signal light bulb socket with the front turn signal light bulb in the direction indicated by the arrow to remove them as a unit.



    E281335
  1. Remove the front turn signal light bulb from the front turn signal light bulb socket.



3. REMOVE FRONT SIDE MARKER LIGHT BULB


E281337
  1. Turn the front side marker light bulb socket with the front side marker light bulb in the direction indicated by the arrow to remove them as a unit.



    E281339
  1. Remove the front side marker light bulb from the front side marker light bulb socket.