Home › BODY ELECTRICAL › LIGHTING › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE REAR TURN SIGNAL LIGHT BULB


E281354
  1. Turn the rear turn signal light bulb socket with the rear turn signal light bulb in the direction indicated by the arrow to remove them as a unit.



    E281356
  1. Remove the rear turn signal light bulb from the rear turn signal light bulb socket.



2. REMOVE BACK UP LIGHT BULB


E281358
  1. Turn the back up light bulb socket with the back up light bulb in the direction indicated by the arrow to remove them as a unit.



    E281360
  1. Remove the back up light bulb from the back up light bulb socket.



3. REMOVE TAIL AND STOP LIGHT BULB


E281362
  1. Turn the tail and stop light bulb socket with the tail and stop light bulb in the direction indicated by the arrow to remove them as a unit.



    E281364
  1. Remove the tail and stop light bulb from the tail and stop light bulb socket.