Home › BODY ELECTRICAL › LIGHTING › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. INSTALL TAIL AND STOP LIGHT BULB


E281365
  1. Install the tail and stop light bulb to the tail and stop light bulb socket.



    E281363
  1. Turn the tail and stop light bulb socket with the tail and stop light bulb in the direction indicated by the arrow to install them as a unit.



2. INSTALL BACK UP LIGHT BULB


E281361
  1. Install the back up light bulb to the back up light bulb socket.



    E281359
  1. Turn the back up light bulb socket with the back up light bulb in the direction indicated by the arrow to install them as a unit.



3. INSTALL REAR TURN SIGNAL LIGHT BULB


E281357
  1. Install the rear turn signal light bulb to the rear turn signal light bulb socket.



    E281355
  1. Turn the rear turn signal light bulb socket with the rear turn signal light bulb in the direction indicated by the arrow to install them as a unit.