Home › BODY ELECTRICAL › LIGHTING › STOP LIGHT SWITCH

STOP LIGHT SWITCH > REMOVAL

for Preparation Click here



1. REMOVE STOP LIGHT SWITCH ASSEMBLY


E281404
  1. Partially remove the stop light switch cover.



    E142787
  1. Disconnect the connector.

  1. Turn the stop light switch assembly counterclockwise and remove the stop light switch assembly.



2. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER


E281405E01
  1. Using a screwdriver, detach the 2 claws and remove the stop light switch mounting adjuster.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Tape