Home › BODY ELECTRICAL › LIGHTING › REAR DOOR COURTESY SWITCH

REAR DOOR COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT REAR DOOR COURTESY SWITCH


E142907E24
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - Switch body
    Pushed
    10 kΩ or higher
    Not pushed
    Below 1 Ω

    If the result is not as specified, replace the rear door courtesy switch.
    Text in Illustration 
    *a
    Component without harness connected
    (Rear Door Courtesy Switch)
    *b
    Pushed
    *c
    Not pushed