Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › FRONT EVAPORATOR TEMPERATURE SENSOR

FRONT EVAPORATOR TEMPERATURE SENSOR > REMOVAL

for Preparation Click here



1. REMOVE AIR CONDITIONING UNIT
.


2. REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY


    E281045
  1. Remove the screw and No. 3 air duct sub-assembly.



3. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY


    E281046E01
  1. for Manual Air Conditioning System:
    Disconnect the 2 connectors.

  1. for Automatic Air Conditioning System:
    Disconnect the 3 connectors.

  1. Remove the 2 screws and air conditioning amplifier assembly.
    Text in Illustration 
    *A
    for Manual Air Conditioning System
    *B
    for Automatic Air Conditioning System



4. REMOVE BLOWER ASSEMBLY


    E281057
  1. Detach the 3 claws and remove the heater clamp.



    E145022
  1. Remove the No. 1 cooling unit packing and No. 2 cooling unit packing.



    E145023
  1. Remove the 6 screws and detach the 3 claws, and remove the blower assembly.



5. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY


    E145024
  1. Remove the No. 1 cooler evaporator sub-assembly from the blower assembly.



6. REMOVE NO. 1 COOLER THERMISTOR


    E145025
  1. Remove the No. 1 cooler thermistor from the No. 1 cooler evaporator sub-assembly.