SEAT HEATER SWITCH > INSTALLATION |
| 1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (SEAT HEATER SWITCH) |
Attach the 3 clips to connect the air conditioning control assembly (seat heater switch) to the center lower instrument panel finish panel.
Connect each connector.
Attach the 8 clips, 2 claws and guide to install the air conditioning control assembly (seat heater switch) together with the center lower instrument panel finish panel.
| 2. INSTALL FRONT CONSOLE BOX |
Install the front console box with the 5 screws <E>.
Install the 2 clips and attach the connector.
| 3. REMOVE REAR CONSOLE BOX ASSEMBLY |
Install the rear console box assembly with the 2 screws <E> and 4 bolts <B>.
Connect the 2 connectors.
| 4. REMOVE CONSOLE BOX CARPET |
Install the console box carpet.
| 5. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY |
w/ Power Outlet Socket:
Attach the 2 wire harness clamps and connect the connector.
![]() |
Attach the 7 clips to install the rear console end panel sub-assembly.
| 6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
Attach the 12 clips to install the upper console panel sub-assembly.
| 7. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Attach the 6 clips to install the upper rear console panel sub-assembly.
| 8. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Twist the shift lever knob sub-assembly in the direction indicated by the arrow to install it.
| *a | Leather Portion |