Home › BODY › SEAT › CLIMATE CONTROL SEAT SWITCH

CLIMATE CONTROL SEAT SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (CLIMATE CONTROL SEAT SWITCH)
  1. Attach the 3 clips to connect the air conditioning control assembly (climate control seat switch) to the center lower instrument panel finish panel.

  1. Connect each connector.

  1. Attach the 8 clips, 2 claws and guide to install the air conditioning control assembly (climate control seat switch) together with the center lower instrument panel finish panel.



2. INSTALL FRONT CONSOLE BOX
  1. Install the front console box with the 5 screws <E>.

  1. Install the 2 clips and attach the connector.



3. REMOVE REAR CONSOLE BOX ASSEMBLY
  1. Install the rear console box assembly with the 2 screws <E> and 4 bolts <B>.

  1. Connect the 2 connectors.



4. REMOVE CONSOLE BOX CARPET
  1. Install the console box carpet.



5. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY
  1. w/ Power Outlet Socket:
    Attach the 2 wire harness clamps and connect the connector.



    B355390
  1. Attach the 7 clips to install the rear console end panel sub-assembly.



6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
  1. Attach the 12 clips to install the upper console panel sub-assembly.



7. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY


    B355387
  1. Attach the 6 clips to install the upper rear console panel sub-assembly.



8. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B355385E01
  1. Twist the shift lever knob sub-assembly in the direction indicated by the arrow to install it.

    HINT:
    1. Tighten the shift lever knob sub-assembly until there is no rotational free-play.
    2. If the leather portion of the knob is not facing forward, tighten the knob further until the leather portion faces forward.

    Text in Illustration 
    *a
    Leather Portion