Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › ROOM TEMPERATURE SENSOR (for Automatic Air Conditioning System)

ROOM TEMPERATURE SENSOR (for Automatic Air Conditioning System) > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR SCUFF PLATE LH
for Regular Cab:
for Double Cab:
for CrewMax:


2. REMOVE COWL SIDE TRIM BOARD LH
for Regular Cab:
for Double Cab:
for CrewMax:


3. REMOVE INSTRUMENT SIDE PANEL LH
for Column Shift Type:
for Floor Shift Type:


4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
for Column Shift Type:
for Floor Shift Type:


5. REMOVE COOLER (ROOM TEMPERATURE SENSOR) THERMISTOR


    E281038
  1. Detach the 2 claws and pull out the cooler (room temperature sensor) thermistor to downward.

  1. Disconnect the air hose and connector, and remove the cooler (room temperature sensor) thermistor.