Home › SECURITIES › THEFT DETERRENT › GLASS BREAKAGE SENSOR (for Column Shift Type)

GLASS BREAKAGE SENSOR (for Column Shift Type) > REMOVAL



1. REMOVE CENTER LOWER INSTRUMENT COVER


    B355335
  1. Remove the 2 clips.

  1. Detach the 2 clips, 2 guides and remove the lower center instrument cover.



2. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


  1. Put protective tape around the air conditioning control assembly.


    E281399E01


    Text in Illustration 
    *A
    for Automatic Air Conditioning System
    *B
    for Manual Air Conditioning System
    *1
    Protective Tape
    *2
    Air Conditioning Control Assembly
    *3
    Center Lower Instrument Panel Finish Panel
    -
    -

  1. Using moulding remover B, detach the 8 clips, 2 claws and guide.

  1. Disconnect each connector and remove the air conditioning control assembly together with the center lower instrument panel finish panel.



    E281401E01
  1. Detach the 3 clips and remove the air conditioning control assembly from the center lower instrument panel finish panel.
    Text in Illustration 
    *1
    Air Conditioning Control Assembly
    *2
    Center Lower Instrument Panel Finish Panel



3. REMOVE GLASS BREAKAGE SENSOR MICROPHONE


    B355125
  1. Detach the 2 claws and remove the glass breakage sensor microphone.