Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AMBIENT TEMPERATURE SENSOR

AMBIENT TEMPERATURE SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL COOLER (AMBIENT TEMPERATURE SENSOR) THERMISTOR


    E286555
  1. Attach the clamp to install the cooler (ambient temperature sensor) thermistor.

  1. Connect the connector.



2. INSTALL RADIATOR GRILLE SUB-ASSEMBLY
  1. Attach the 4 claws and 3 clips to install the radiator grille sub-assembly.

  1. Install the 4 screws and 2 clips.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }