Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AMBIENT TEMPERATURE SENSOR

AMBIENT TEMPERATURE SENSOR > REMOVAL

for Preparation Click here



1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY


    B353342E01
  1. Put protective tape around the radiator grille sub-assembly.
    Text in Illustration 
    *1
    Protective Tape

  1. Remove the 4 screws and 2 clips.



    B353345
  1. Detach the 4 claws and 3 clips and remove the radiator grille sub-assembly.



2. REMOVE COOLER (AMBIENT TEMPERATURE SENSOR) THERMISTOR


    E286555
  1. Disconnect the connector.

  1. Using a clip remover, detach the clamp and remove the cooler (ambient temperature sensor) thermistor.