TIRE PRESSURE WARNING RESET SWITCH > INSTALLATION |
| 1. INSTALL TIRE PRESSURE WARNING RESET SWITCH |
Attach the 2 claws to install the tire pressure warning reset switch.
Connect the switch connector.
| 2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
Connect the hood lock control cable to the hood lock control lever, rotate the hood lock control cable, and then slide and push the hood lock control cable into place.

Attach the 3 hooks to connect the hood lock control lever to the lower instrument panel finish panel sub-assembly LH.
Connect each connector.
![]() |
Attach the 9 clips and 2 claws to install the lower instrument panel finish panel sub-assembly LH.
Install the 2 bolts <A>.
| 3. INSTALL INSTRUMENT SIDE PANEL LH |
![]() |
Attach the 4 guides and 3 claws to install the instrument side panel LH.
| 4. INSTALL COWL SIDE TRIM BOARD LH |
Attach the 2 clips to install the cowl side trim board LH.
Install the nut.
| 5. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab, for CrewMax) |
Attach the 6 claws and 3 clips to install the front door scuff plate LH.
| 6. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab) |
Attach the 6 claws and 3 clips to install the front door scuff plate LH.