Home › BODY ELECTRICAL › HORN › LOW PITCHED HORN

LOW PITCHED HORN > REMOVAL

for Preparation Click here



1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY


    B353342E01
  1. Put protective tape around the radiator grille sub-assembly.
    Text in Illustration 
    *1
    Protective Tape

  1. Remove the 4 screws and 2 clips.



    B353345
  1. Detach the 4 claws and 3 clips and remove the radiator grille sub-assembly.



2. REMOVE LOW PITCHED HORN ASSEMBLY


B353330
  1. Disconnect the connector.

  1. Remove the bolt and low pitched horn assembly.