FRONT BUMPER > REASSEMBLY |
| 1. INSTALL LOWER NO. 1 RADIATOR GRILLE |
Attach the 17 claws to install the lower No. 1 radiator grille to the front valance panel.
| 2. INSTALL FRONT BUMPER EXTENSION LH |
Install the front bumper extension LH with the 4 nuts.
| 3. INSTALL FRONT BUMPER EXTENSION RH |
| 4. INSTALL FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY |
Install the front license plate bracket sub-assembly with the 2 screws.
| 5. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light) |
Attach the 2 claws to install the front bumper hole cover LH.
| 6. INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light) |
| 7. INSTALL FRONT BUMPER HOLE COVER LH (w/ Fog Light) |
for Steel Type Bumper:
Attach the 2 claws to install the front bumper hole cover LH.
for Resin Type Bumper:
Attach the 2 claws to install the front bumper hole cover LH.
Install the clip.
| 8. INSTALL FRONT BUMPER HOLE COVER RH (w/ Fog Light) |
| 9. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET |
Install the front bumper extension mounting bracket with the 10 bolts.
Install the clip.
| 10. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) |
![]() |
Install the No. 1 ultrasonic sensor retainer as shown in the illustration.
| 11. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) |
![]() |
Install the No. 1 ultrasonic sensor as shown in the illustration.
| 12. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light) |
| 13. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light) |