REAR BUMPER (for Steel Type Bumper) > INSTALLATION |
| 1. INSTALL REAR BUMPER COVER |
w/ Towing Package:
Using an engine lifter or equivalent, install the rear bumper cover with the 12 bolts.
w/o Towing Package:
Using an engine lifter or equivalent, install the rear bumper cover with the 8 bolts.
| 2. INSTALL WIRING HARNESS CONNECTOR (w/ Towing Package) |
Attach the 2 claws to install the wiring harness connector.
Connect the connector.
| 3. INSTALL CONNECTOR COVER (w/o Towing Package) |