REAR BUMPER (for Resin Type Bumper) > REMOVAL |
| 1. REMOVE WIRING HARNESS CONNECTOR (w/ Towing Package) |
![]() |
Disconnect the connector.
Detach the 2 claws and remove the wiring harness connector.
| 2. REMOVE CONNECTOR COVER (w/o Towing Package) |
| 3. REMOVE REAR BUMPER COVER |
![]() |
Disconnect the 2 connectors and detach the clamp.
w/ Towing Package:
Using an engine lifter or equivalent, remove the 12 bolts and rear bumper cover.

w/o Towing Package:
Using an engine lifter or equivalent, remove the 8 bolts and rear bumper cover.
