Home › BODY › EXTERIOR › FENDER PANEL MUDGUARD

FENDER PANEL MUDGUARD > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedures listed below are for the LH side.



1. INSTALL FRONT FENDER MUDGUARD LH
  1. Install the front fender mudguard LH with the 3 screws.

  1. Install the clip.



2. INSTALL REAR QUARTER PANEL MUDGUARD LH
  1. Install the rear quarter panel mudguard LH with the 5 screws.

  1. Install the clip.



3. INSTALL SIDE STEP ASSEMBLY LH (w/ Side Step)


  1. Install the side step with the 8 bolts.

    Torque:
    19.5 N*m{ 199 kgf*cm , 14 ft.*lbf }



    B169240E05