Home › BODY › EXTERIOR › FENDER PANEL MUDGUARD

FENDER PANEL MUDGUARD > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedures listed below are for the LH side.



1. REMOVE SIDE STEP ASSEMBLY LH (w/ Side Step)


  1. Remove the 8 bolts and side step.


    B169240E05



2. REMOVE FRONT FENDER MUDGUARD LH


B355062
  1. Remove the clip.

  1. Remove the 3 screws and front fender mudguard LH.



3. REMOVE REAR QUARTER PANEL MUDGUARD LH


B355063
  1. Remove the clip.

  1. Remove the 5 screws and rear quarter panel mudguard LH.