ACC RELAY > ON-VEHICLE INSPECTION |
| 1. INSPECT MAIN BODY ECU (ACC RELAY) |
Measure the resistance of the ACC relay circuit.
Measure the resistance according to the value(s) in the table below.

| *a | Component without harness connected (Main Body ECU) | - | - |
| Tester Connection | Condition | Specified Condition |
| DD47 - DD8 | When battery voltage is not applied between DD45 and DD62 | 10 kΩ or higher |
| When battery voltage is applied between DD45 and DD62 | Below 1 Ω |