REAR BUMPER (for Steel Type Bumper) > DISASSEMBLY |
| 1. REMOVE REAR BUMPER PLATE LH |
![]() |
Detach the 3 claws and clip and remove the rear bumper plate LH.
| 2. REMOVE REAR BUMPER PLATE RH |
| 3. REMOVE REAR BUMPER PAD SUB-ASSEMBLY LH |
![]() |
Remove the 3 clips.
Detach the 12 claws and 2 guides and remove the rear bumper pad sub-assembly LH as shown in the illustration.
| 4. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH |
![]() |
Detach the 2 claws.
![]() |
Disconnect the connector and remove the license plate light assembly LH.
| 5. REMOVE LICENSE PLATE LIGHT ASSEMBLY RH |
| 6. REMOVE REAR BUMPER BAR CORNER REINFORCEMENT LH |
![]() |
Remove the 5 bolts and rear bumper bar corner reinforcement LH.
| 7. REMOVE REAR BUMPER BAR CORNER REINFORCEMENT RH |
| 8. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) |
![]() |
Remove the No. 2 ultrasonic sensor as shown in the illustration.
| 9. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) |
![]() |
Remove the No. 2 ultrasonic sensor retainer as shown in the illustration.
| 10. REMOVE NO. 3 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) |
Detach the 4 claws and remove the No. 3 ultrasonic sensor as shown in the illustration.

| 11. REMOVE NO. 2 FRAME WIRE |
w/ Towing Package:
Detach all the clamps and remove the No. 2 frame wire from the receiver hitch bracket sub-assembly.

| *A | w/ Intuitive Parking Assist System | *B | w/o Intuitive Parking Assist System |
w/o Towing Package:
Detach all the clamps and remove the No. 2 frame wire from the rear bumper reinforcement sub-assembly.

| *A | w/ Intuitive Parking Assist System | *B | w/o Intuitive Parking Assist System |
| 12. REMOVE REAR BUMPER PLATE |
![]() |
Remove the 2 bolts and rear bumper plate.
| *A | w/ Towing Package |
| *B | w/o Towing Package |
| 13. REMOVE REAR BUMPER BAR LH |
![]() |
Remove the 5 bolts and rear bumper bar LH.
| 14. REMOVE REAR BUMPER BAR RH |
| 15. REMOVE REAR BUMPER UPPER COVER LH |
![]() |
Remove the 2 nuts and rear bumper upper cover LH.
| 16. REMOVE REAR BUMPER UPPER COVER RH |