Home › ENGINE ยท 1GR-FE › EMISSION CONTROL › AIR PUMP

AIR PUMP > DISASSEMBLY

for Preparation Click here



1. REMOVE AIR PUMP INLET


    A273860
  1. Remove the 2 bolts, slide the clip off of the No. 1 air injection system hose, disconnect the hose and remove the air pump inlet.



2. REMOVE NO. 1 AIR INJECTION SYSTEM HOSE
  1. Remove the No. 1 air injection system hose from the air pump.



3. REMOVE AIR PUMP


    A238162
  1. Detach the 2 clamps and remove the 3 air pump insulators and pump from the bracket.