Home › BODY ELECTRICAL › LIGHTING › LIGHTING SYSTEM

LIGHTING SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the Techstream.

    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch ON.

    3. Turn the Techstream on.

    4. Enter the following menus: Customize Setting.

    5. Select the setting by referring to the table below.

      Main Body 
      Display
      Default
      Contents
      Setting
      I/L when ACC OFF
      ON
      Illuminates light when ignition switch turned to ACC
      (Room light illuminated when interior light switch set to DOOR)
      ON / OFF
      Lighting Time
      15s
      Changes illumination duration after door closure
      (It will quickly fade out when turning ignition switch ON)
      7.5s / 15s / 30s
      I/L ON W/Door key Unlock
      ON
      Function to light up room light when unlocking with door key cylinder
      (Room light illuminated when interior light switch set to DOOR)
      ON / OFF
      Light Auto OFF Delay
      30s
      Function to continue illuminating headlight for certain period of time after closing all doors with ignition switch turned from ON to OFF under condition that light control switch is at HEAD or AUTO with the headlight ON
      OFF / 30s / 60s / 90s
      Interior Light Control
      ON
      This function controls the interior lights.
      ON / OFF
      Sensitivity
      NORMAL
      Function to adjust ambient light sensitivity of automatic light control system*1
      LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
      Disp Ex ON Sen
      NORMAL
      Function to change level of ambient light at which system dims lights such as combination meter indicator light, A/C indicator light and clock light*2
      LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
      Disp Ex OFF Sen
      NORMAL
      Function to change level of ambient light at which system cancels dimming of lights such as combination meter indicator light, A/C indicator light and clock light*3
      LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2

      HINT:
      The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.


      *1 
      System Setting

      E224788

      Setting
      DARK2
      DARK1
      NORMAL
      LIGHT1
      LIGHT2

      HINT:
      When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.


      *2 
      System Setting

      E224788

      Setting
      DARK2
      DARK1
      NORMAL
      LIGHT1
      LIGHT2

      HINT:
      When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.


      *3 
      System Setting

      E224788

      Setting
      DARK2
      DARK1
      NORMAL
      LIGHT1
      LIGHT2

      HINT:
      When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

  2. Customizing with Multi-display.

    1. Turn the ignition switch ON.

    2. Enter the following menus: Setup / Vehicle / Vehicle Settings / Vehicle Customization / Light Settings.

    3. Select the setting by referring to the table below.

      Main Body 
      Display
      Default
      Contents
      Setting
      Relevant ECU
      Interior Lights Off Time
      15 s
      This function controls the interior lights.
      OFF, 7.5 s, 15 s or 30 s
      Main body ECU (Driver side junction block
      Light Sensor Sensitivity
      0
      (middle bar)
      Adjusts the ambient light sensitivity of the automatic light control system.*
      -2, -1, 0, +1 or +2
      Headlights Off Time
      30 s
      Function to continue illuminating headlights and taillights for a certain period of time after closing driver door with the ignition switch turned from ON to off under the condition that the headlight dimmer switch is in the AUTO position with the headlights and taillights on.
      OFF, 30 s, 60 s or 90 s

      HINT:
      The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.


      * 
      System Setting

      E224788

      Setting
      -2
      -1
      0
      +1
      +2

      HINT:
      When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.