Home › BODY › EXTERIOR › REAR BODY SIDE PANEL PROTECTOR

REAR BODY SIDE PANEL PROTECTOR > REMOVAL

for Preparation Click here



1. REMOVE REAR BODY SIDE PANEL PROTECTOR LH


  1. for Regular Cab:

    1. Put protective tape around the rear body side panel protector LH.

    2. Using moulding remover D, detach the 28 clips and remove the rear body side panel protector LH.



    3. Remove the rear body protector plate.


      B353316E01


      Text in Illustration 
      *1
      Protective Tape
      *2
      Moulding Remover D



  1. for Double Cab:

    1. Put protective tape around the rear body side panel protector LH.

    2. Using moulding remover D, detach the 24 clips and remove the rear body side panel protector LH.



    3. Remove the rear body protector plate.


      B353317E01


      Text in Illustration 
      *1
      Protective Tape
      *2
      Moulding Remover D



  1. for CrewMax:

    1. Put protective tape around the rear body side panel protector LH.



    2. Using moulding remover D, detach the 20 clips and remove the rear body side panel protector LH.


      B353318E01


      Text in Illustration 
      *1
      Protective Tape
      *2
      Moulding Remover D



2. REMOVE REAR BODY SIDE PANEL PROTECTOR RH

HINT:
Use the same procedure described for the LH side.