FRONT SEAT ASSEMBLY (for Manual Seat) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT SEAT HEADREST ASSEMBLY |
Remove the front seat headrest assembly.
| 4. REMOVE INNER SEAT TRACK BRACKET COVER LH |
Operate the seat track adjusting handle to move the seat to the foremost position.
![]() |
Detach the clip to remove the inner seat track bracket cover LH in the direction indicated by the arrow shown in the illustration.
| 5. REMOVE OUTER SEAT TRACK BRACKET COVER LH |
![]() |
Detach the clip to remove the outer seat track bracket cover LH in the direction indicated by the arrow shown in the illustration.
| 6. REMOVE FRONT SEAT ASSEMBLY LH |
![]() |
Remove the 2 bolts.
Operate the seat track adjusting handle to move the seat to the rearmost position.
![]() |
Remove the 2 bolts.
Operate the seat track adjusting handle to move the seat to the center position and operate the reclining adjuster release handle LH to move the seatback to the upright position.
![]() |
Detach the wire harness clamp and disconnect the 2 connectors under the seat.
Disconnect the connector of the front seat airbag assembly LH.
| *1 | Front Seat Airbag Assembly LH Connector |
Place a finger on the slider, slide the slider to release the lock, and then disconnect the connector of the front seat airbag assembly LH.

| *1 | Slider | - | - |
Remove the front seat assembly LH from the vehicle.