FRONT SEAT ASSEMBLY (for Power Seat) > INSTALLATION |
| 1. INSTALL FRONT SEAT ASSEMBLY LH |
Place the front seat assembly LH in the cabin.
![]() |
Connect the connector of the front seat airbag assembly LH.
Connect the connector of the front seat wire LH.
Connect the connector of the front seat inner belt assembly LH and attach the wire harness clamp under the seat.
| *1 | Front Seat Inner Belt Assembly LH |
| *2 | Front Seat Wire LH |
| *3 | Front Seat Airbag Assembly LH |
Align the pin of the front seat with the hole in the vehicle.
Temporarily install the front seat assembly LH with the 4 bolts.
Connect the cable to the negative (-) battery terminal.
w/ Leg Support Adjustment Switch:
Operate the seat variable cushion switch to move the seat to the rearmost position.
w/ Vertical Adjuster:
Operate the front power seat switch LH (vertical switch) to move the seat to the lowermost position.
Operate the front power seat switch LH (slide switch) to move the seat to the rearmost position.
![]() |
Tighten the 2 bolts.
Operate the front power seat switch LH (slide switch) to move the seat to the foremost position.
![]() |
Tighten the 2 bolts.
During the sliding operation of the front seat, check that the left and right adjusters move together smoothly and lock simultaneously. If the seat adjusters do not lock simultaneously, loosen the seat mounting bolts to adjust the adjuster position.
| 2. INSTALL INNER SEAT TRACK BRACKET COVER LH |
Attach the clip to install the inner seat track bracket cover LH.
| 3. INSTALL OUTER SEAT TRACK BRACKET COVER LH |
Attach the clip to install the outer seat track bracket cover LH.
| 4. INSTALL FRONT SEAT HEADREST ASSEMBLY |
Install the front seat headrest assembly.
| 5. CHECK SRS WARNING LIGHT |
| 6. INSPECT POWER SEAT CONTROL SYSTEM |
w/o Seat Position Memory System:
(Click here)
w/ Seat Position Memory System:
(Click here)
| 7. INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System) |
| 8. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System) |