FRONT SEAT ASSEMBLY (for Power Seat) > REMOVAL |
| 1. PRECAUTION |
| 2. REMOVE FRONT SEAT HEADREST ASSEMBLY |
Remove the front seat headrest assembly.
| 3. REMOVE INNER SEAT TRACK BRACKET COVER LH |
Operate the front power seat switch LH (slide switch) to move the seat to the foremost position.
![]() |
Detach the clip to remove the inner seat track bracket cover LH in the direction indicated by the arrow shown in the illustration.
| 4. REMOVE OUTER SEAT TRACK BRACKET COVER LH |
![]() |
Detach the clip to remove the outer seat track bracket cover LH in the direction indicated by the arrow shown in the illustration.
| 5. REMOVE FRONT SEAT ASSEMBLY LH |
![]() |
Remove the 2 bolts.
Operate the front power seat switch LH (slide switch) to move the seat to the rearmost position.
![]() |
Remove the 2 bolts.
Operate the front power seat switch LH (slide switch) to move the seat to the center position and operate the front power seat switch LH (reclining switch) to move the seatback to the upright position.
w/ Vertical Adjuster:
Operate the front power seat switch LH (vertical switch) to move the seat to the highest position.
w/ Leg Support Adjustment Switch:
Operate the seat variable cushion switch to move the seat to the foremost position.
Disconnect the cable from the negative (-) battery terminal.
![]() |
Detach the clamp and disconnect the connector of the front seat inner belt assembly LH.
Disconnect the connector of the front seat wire LH.
Disconnect the connector of the front seat airbag assembly LH.
| *1 | Front Seat Inner Belt Assembly LH |
| *2 | Front Seat Wire LH |
| *3 | Front Seat Airbag Assembly LH |
Place a finger on the slider, slide the slider to release the lock, and then disconnect the front seat side airbag connector.

| *1 | Slider | - | - |
Remove the front seat assembly LH from the vehicle.